助行器耐久性疲劳试验机测试标准/轮式助行器疲劳试验机
一，依据GB/T 14728.2-2006《双臂操作助行器具要求和试验方法 第2部分：轮式助行架》标准第5.12条的要求制作。本机采用数显控制，可设置显示行驶的速度，行驶距离，加载力采用架构加载重物，显示加载周期。到达加载周期自动停机。It is made according to the requirements of article 5.12 of GB / T 14728.2-2006 double arm operation walking aid requirements and test methods Part 2: wheel type walking aid. The machine is controlled by digital display, which can set the display of driving speed, driving distance, loading force and load cycle. Stop automatically when the loading cycle is reached.
二、主要技術参数：
1.设备负载150kg;递增砝码加载，
2.
3.加载频率：小于1HZ，1-60次/分钟可调，
4.加载周期次数：1-999999可设置
5.速度0.4/周期。0-2公里/小时可调
6.具有停电自动保存测试记录。
7.助行架采用框架固定。
8.传动皮带长宽约
9.机台尺寸约
10.数显仪表显示行驶线速度，测试次数，测试频率。
11.电源：380V，50HZ
助行器疲劳试验机，双臂操作助行器测试机系列
Two
3. Loading frequency: less than 1Hz, 1-60 times / min adjustable,
4. Loading cycle times: 1-999999 settable
5. Speed 0.4/cycle. 0-2 km / h adjustable
6. The test record shall be saved automatically in case of power failure.
7. The walking aid frame is fixed by frame.
8. The length and width of the drive belt are about
9. Machine size is about
10. The digital display instrument displays the traveling line speed, test times and test frequency.
11. Power supply: 380V, 50Hz
Walking aid fatigue tester, double arm operation walking aid tester series